Frame and Panel Doors

Frame and panel construction allows a solid wood door to remain true, even as humidity and temperature change.

http://www.bcdoor.com/Frame.htm

The basic Frame and Panel layout uses two vertical Stiles, and two horizontal Rails as the frame.The frame is grooved to accept a shaped Solid Wood Panel. The panel is free to expand and contract within the frame. The overall frame size changes very little, so the door opens and closes easily whether the air is dry or moist.

Larger panels are usually divided using Mullions and Mid Rails.

Lites are divided using Muntins

Frame

The strength and stability of kiln dried Douglas Fir is unmatched for use as stile and rail components. Stile and Rail End View The stiles and rails often have a profile cut into the inside edge - usually a smaller version matching the profile of the panel.

Cope and stick joinery is achieved with a set of special router cutters. Stile and Rail with Floating Tenon These cut the profile on the edge of the frame parts and also cut a reverse version of the same profile in the ends of the rail so that they may be fitted to the stiles and glued in place. A floating tenon is glued into a precut mortise in the end of the rail and the edge of the stile, to reinforce the join.


Panels

The panels are captured in a groove made in the inside edge of the frame members. Frame and Panel Profile Drawing Panels are made slightly smaller than the available space within the frame to provide room for expansion. A typical panel is cut to allow 1/8" clearance between itself and the frame. An elastic caulking material is placed in the groove between the edge of the panel and the frame before assembly to seal the door against air leakage.

Frame and Panel Profile Drawing

The panels may be Flat, Raised Profile, or Beveled Tongue and Groove.

A flat panel has it's visible face flush with the front of the groove in the frame. This gives the panel an inset appearance.

A raised panel is made from thicker stock and has a profile cut into it's edge so that the panel surface is raised above the groove.






Choosing Panels and Profiles

Custom wood door design enables you to choose a theme that matches the decor of your home.

Roll mouse over thumbnails to view slide show.






Take the time now to customize you door to achieve your desired style. We offer 4 basic panel styles, combine your choice of panels and profiles to suit your taste.



Now is the time to get creative. Take ideas from our door photo galleries, view our standard Door Drawings.

This is a good starting point, customize your door with your desired Panels and Profiles, a Dentil Shelf may enhance your door.

To view drawings of some common frame and panel arrangements, visit Door Drawings.